 |
Construction Sensors |
|
For over 25years MOBA have developed and manufactured customized components and user friendly system solutions within the construction industry. They provide high quality devices used for leveling, grade and slope measurements.
Slope Measurement
The Moba Slope systems are used for various applications such as controlling motor grader blades at a constant slope, providing accurate guidance for drill rigs and Pile driving. There are two models of sensors used for slope measurement; the Duo level and Digi Level. Both devices determine a machine's longitudinal slope or cross-slope and indicates these slope values on a display unit. Each deviation from the zero position, irrespective of its orientation, will be indicated by one or several LEDs on the display devices. The display devices are a separate unit to the sensor and should be located within easy reach of the operator. When the two dimensional dead centre position is reached, the centre diode will be illuminated. Below are the specifications for the Duo level sensor and display and also the specifications for the Digi level sensor and display. |
Duo level sensor III / IV
- Voltage range: 20...30V
- Measuring ranges: ± 5°; ± 10° (± 5%)
- Current consumption: < 100mA without indicator
- Stability of the zero point: 0.2°
- Enclosure protection: IP67
|
 |
Duo level displays
- Voltage range: 20 ...30 V
- Max. resolution: 0.2° pro LED
- Current consumption: < 150 mA ohne Geber
- Good readability
- Easy to put into operation
- Easy to use
- Reverse battery protection and protection against voltage spikes
- Change-over switch: 1° / 5° (1% / 5%)
- Enclosure protection: built-on indicator IP65; built-in indicator IP66
|
 |
Digi level sensor
- Voltage range: 10 ... 30 V DC
- Current consumption: max. 70 mA @ 24 V
- Measuring ranges: ± 10° (± 17%); ± 60° (± 170%)
- Zero point stability: ± 0.1°
- Interface: CAN
- Enclosure protection: IP67
|
 |
Digi level display
- Voltage range: 10 ... 30 V DC
- Current consumption: < 200 with backlight
- Good readability
- Easy to put into operation
- Easy to use
- Reverse battery protection and protection against voltage spikes
- Indicated value of the inclination: degree or percent
- ± 10° (± 17%); ± 60° (± 170%)
- Interface: CAN
- Enclosure protection: IP65
|
 |
Machine Control Systems
- Automatic control of height and slope
- Asphalt Pavers, Milling Machines
- 1D Cross Slope
- 2D Option Cross Slope with Height
- Use with Leica Geosystems GPS and Total Stations
Click here for Moba Website
|
|
|
